Welcome to Industrial & Production Engineering Department

Technical Bulletin

Publications Details

Sr.No. Author Name Title Year Complete Citation
1 Dr. Arun Kumar Chaudhary Recent development in natural fiber composites, testing and fabrication methods: A review 2023 Kumar, Sundeep & Gupta, Deepak & Sharma, Vikas & Chaudhary, Arun & Meena, M.L. & Ajay,. (2023). Recent development in natural fiber composites, testing and fabrication methods: A review. Materials Today: Proceedings. 10.1016/j.matpr.2023.02.073
2 Dr. Arun Kumar Chaudhary Bioresorbable polymers/HNT blend composite wound dressings 2023 Deepak Gupta, Vaishally Dogra, Deepak Verma, Arun Kumar Chaudhary, Maneesh Tewari, Chapter 05, Bioresorbable polymers/HNT blend composite wound dressings, Editors: Deepak Verma, Manunya Okhawilai, Kheng-Lim Goh, Seeram Ramakrishna, Pooria Pasbakhsh, Mohit Sharma in Bioresorbable Polymers and their Composites: Characterization and Fundamental Processing for Pharmaceutical and Medical Device Development. 2023. ISBN: 9780443189166. Woodhead Publishing (Elsevier)
3 Dr. Arun Kumar Chaudhary PCL-based composites and their utilizations in the medical sector 2023 Deepak Gupta, Vaishally Dogra, Deepak Verma, Arun Kumar Chaudhary, Maneesh Tewari, Chapter 04, PCL-based composites and their utilizations in the medical sector, Editors: Deepak Verma, Manunya Okhawilai, Kheng-Lim Goh, Seeram Ramakrishna, Pooria Pasbakhsh, Mohit Sharma in Bioresorbable Polymers and their Composites: Characterization and Fundamental Processing for Pharmaceutical and Medical Device Development. 2023. ISBN: 9780443189166. Woodhead Publishing (Elsevier)
4 Dr. Arun Kumar Chaudhary Thermo-mechanical analysis of bhimal fiber (Grewia optiva)-CaCO3/flyash/TiO2 reinforced epoxy bio-composites 2023 Deepak Gupta, Arun Kumar Chaudhary, Vinay Kumar Singh, Deepak Verma, Kheng Lim Goh, Mohit Sharma,Thermo-mechanical analysis of bhimal fiber (Grewia optiva)-CaCO3/flyash/TiO2 reinforced epoxy bio-composites, Industrial Crops and Products, Volume 204, Part B, 2023, 117341, ISSN 0926-6690, https://doi.org/10.1016/j.indcrop.2023.117341 (I.F. 5.9 )
5 Dr. Arun Kumar Chaudhary Impact of Graphite Particle Surface Modification on the Strengthening of Cross-Linked Polyvinyl Alcohol Composites: A Comprehensive Investigation 2023 Agrawal, Pawan; Sharma, Pragya; Verma, Akarsh; Singh, V.; Chaudhary, Arun; Chauhan, Sakshi, Impact of Graphite Particle Surface Modification on the Strengthening of Cross-Linked Polyvinyl Alcohol Composites: A Comprehensive Investigation. Proc IMechE Part L: J Materials: Design and Applications.DOI: 10.1177/14644207231188601 (I.F. 2.4)
6 Dr. Arun Kumar Chaudhary Experimental analysis and optimization of process parameters using response surface methodology of surface nanocomposites fabricated by friction stir processing 2023 Ravi Butola, Kapil Dev Pandey, Qasim Murtaza, Ravinderjit Singh Walia, Mohit Tyagi, Krovvidi Srinivas, Arun Kumar Chaudhary. Experimental analysis and optimization of process parameters using response surface methodology of surface nanocomposites fabricated by friction stir processing. Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems. 2023;0(0). doi:10.1177/23977914231151485 (I.F. 6)
7 Dr. Arun Kumar Chaudhary Advanced biopolymer-based composites: construction and structural applications 2022 Deepak Verma, Vaishally Dogra, Arun Kumar Chaudhary, Ravikant Mordia, 5 - Advanced biopolymer-based composites: construction and structural applications, Editor(s): Deepak Verma, Mohit Sharma, Kheng Lim Goh, Siddharth Jain, Himani Sharma, In Woodhead Publishing Series in Composites Science and Engineering, Sustainable Biopolymer Composites, Woodhead Publishing, 2022, Pages 113-128, ISBN 9780128222911, https://doi.org/10.1016/B978-0-12-822291-1.00010-5
8 Dr. Arun Kumar Chaudhary Advanced processing of 3D printed biocomposite materials using artificial intelligence 2022 Deepak Verma, Yu Dong, Mohit Sharma & Arun Kumar Chaudhary (2022) Advanced processing of 3D printed biocomposite materials using artificial intelligence, Materials and Manufacturing Processes, 37:5, 518-538, DOI: 10.1080/10426914.2021.1945090
9 Dr Rajiv Suman Significant applications of big data in Industry 4.0 2021 Mohd Javaid, Abid Haleem, Ravi Pratap Singh, Rajiv Suman, "Significant applications of big data in Industry 4.0", Journal of Industrial Integration and Management, https://doi.org/10.1142/S2424862221500135.
10 Dr. Arun Kumar Chaudhary Investigations and Optimization of Rotary Tool Micro-USM Process for Fabrication of Microchannels 2021 Sandeep Kumar, Akshay Dvivedi, Ajay Suryavanshi, Arun Kumar Chaudhary, Maneesh Tewari, Investigations and Optimization of Rotary Tool Micro-USM Process for Fabrication of Microchannels, Materials Today: Proceedings, 2021, ISSN 2214-7853, doi.org/10.1016/j.matpr.2021.01.423
11 Dr Rajiv Suman Impact of COVID-19 Pandemic on particulate matter (PM) concentration and harmful gaseous components on Indian metros 2021 Rajiv Suman, Mohd Javaid, Sushil Kumar Choudhary, Abid Haleem, Ravi Pratap Singh, Devaki Nandan, Shokat Ali, Shanay Rab, "Impact of COVID-19 Pandemic on particulate matter (PM) concentration and harmful gaseous components on Indian metros", Sustainable Operations and Computers, Volume 2, 2021, Pages 1-11, https://doi.org/10.1016/j.susoc.2021.02.001.
12 Dr. Ajay Heat Flux and Heat Transfer Coefficient Model Analysis During Turning of al (7068) Alloy 2021 Rahul Kshetri and Ajay; (2021; Heat Flux and Heat Transfer Coefficient Model Analysis During Turning of al (7068) Alloy; Materials Today: Procedings; Else Elsevier, Science Direct.
13 Dr. Arun Kumar Chaudhary Fabrication of Three-Dimensional Geometry on Two Dimensional Abrasive Water Jet Machine 2021 Vandana Jain, Anand K. Mandal, Arun K. Chaudhary, Arvind Patidar, Fabrication of Three-Dimensional Geometry on Two Dimensional Abrasive Water Jet Machine, Materials Today: Proceedings, Volume 44, Part 1, 2021, Pages 1975-1978, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.12.108
14 Dr. Arun Kumar Chaudhary The Effect of Elastic Modulus of Adhesive on Stress-Distribution in Weld bonded Joint of Al 6082-T6 sheets 2021 Anand Kumar Mandal, Arun Kumar Chaudhary, Vandana Jain, M.L.Meena, Jambeshwar Sahu , R.S Jadoun, The Effect of Elastic Modulus of Adhesive on Stress-Distribution in Weld bonded Joint of Al 6082-T6 sheets, Materials Today: Proceedings, Volume 44, Part 1, 2021, Pages 1999-2004, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.12.119
15 Devaki Nandan Assessment of irrigation requirement and scheduling under canal command area of Upper Ganga Canal using CropWat model 2021 Sharma, D. N., & Tare, V. (2021). Assessment of irrigation requirement and scheduling under canal command area of Upper Ganga Canal using CropWat model. Modeling Earth Systems and Environment, 1-11.
16 Anand Kumar Mandal The effect of elastic modulus of adhesive on stress-distribution in weld bonded joint of Al 6082-T6 sheets 2021 1. Kumar A, Kumar A, Jain V, et al. Materials Today : Proceedings The effect of elastic modulus of adhesive on stress-distribution in weld bonded joint of Al 6082-T6 sheets. Materials Today: Proceedings. 2021;(xxxx). Available at: https://doi.org/10.1016/j.matpr.2020.12.119.
17 Anand Kumar Mandal Fabrication of three-dimensional geometry on two dimensional abrasive water jet machine 2021 1. Jain V, Mandal AK, Chaudhary AK, Patidar A. Materials Today : Proceedings Fabrication of three-dimensional geometry on two dimensional abrasive water jet machine. Materials Today: Proceedings. 2021;(xxxx). Available at: https://doi.org/10.1016/j.matpr.2020.12.108.
18 Anand Kumar Mandal Effect of feed rate and cutting speed on cutting forces developed during machining of epoxy based almond shell (Prunus amygdalus L.) – Coconut fiber (Cocos nucifera) particle reinforced biocomposites 2021 1. Kumar A, Gope PC, Kumar A, Jain V, Patidar A. Materials Today : Proceedings Effect of feed rate and cutting speed on cutting forces developed during machining of epoxy based almond shell ( Prunus amygdalus L .) – Coconut fiber ( Cocos nucifera ) particle reinforced biocomposites. Materials Today: Proceedings. 2021;(xxxx). Available at: https://doi.org/10.1016/j.matpr.2020.12.081.
19 Devaki Nandan Big data applications to take up major challenges across manufacturing industries: A brief review 2021 Azeem, M., Haleem, A., Bahl, S., Javaid, M., Suman, R., & Nandan, D. (2021). Big data applications to take up major challenges across manufacturing industries: A brief review. Materials Today: Proceedings.
20 Devaki Nandan Impact of COVID-19 Pandemic on Particulate Matter (PM) concentration and harmful gaseous components on Indian metros 2021 Suman, R., Javaid, M., Choudhary, S. K., Haleem, A., Singh, R. P., Nandan, D., ... & Rab, S. (2021). Impact of COVID-19 Pandemic on Particulate Matter (PM) concentration and harmful gaseous components on Indian metros. Sustainable Operations and Computers, 2, 1-11.
21 Dr. Arun Kumar Chaudhary Effect of blend proportion on properties of thermal bonded chicken-jute fiber nonwovens 2021 N Sah, D Kamalraj, A Goel, AK Chaudhary, Effect of blend proportion on properties of thermal bonded chicken-jute fiber nonwovens. Man-Made Textiles in India Vol. 49, Issue 12, Pages 410-414, 2021, ISSN: 3777537
22 Dr. Arun Kumar Chaudhary Optimization of Abrasive Wear Behaviour of Cenosphere Filled Basalt-Epoxy Composites Using Taguchi Approach 2021 Vikas Sharma, M L Meena, A K Chaudhary, and Sundeep Kumar, Optimization of Abrasive Wear Behaviour of Cenosphere Filled Basalt-Epoxy Composites Using Taguchi Approach, IOP Conf. Ser.: Mater. Sci. Eng. Volume 1017, 2021, Pages 1-10, doi:10.1088/1757-899X/1017/1/012014
23 Dr. Arun Kumar Chaudhary High Speed Super Abrasive Grinding of Sintered Yttria Stabilised Zirconia (YSZ) Using Single Layer Electroplated Diamond Grinding Wheels 2021 Arvind Patidar, Anand Kumar Mandal, Arun Kumar Chaudhary, High Speed Super Abrasive Grinding of Sintered Yttria Stabilised Zirconia (YSZ) Using Single Layer Electroplated Diamond Grinding Wheels, Materials Today: Proceedings, Volume 45, Part 6, 2021, Pages 4660-4665, ISSN 2214-7853, doi.org/10.1016/j.matpr.2021.01.111
24 Dr. Arun Kumar Chaudhary Cenosphere Powder Filled Basalt Fiber Reinforced Epoxy Composite: Physical, Mechanical, and Thermal Conductivity Analysis 2021 Vikas sharma, Makkhan Lal Meena, Arun Kumar Chaudhary and Mukesh Kumar, Cenosphere Powder Filled Basalt Fiber Reinforced Epoxy Composite: Physical, Mechanical, and Thermal Conductivity Analysis, Materials Today: Proceedings, Volume 44, Part 6, 2021, Pages 4984-4989, ISSN 2214-7853, doi.org/10.1016/j.matpr.2020.12.938
25 Dr. Arun Kumar Chaudhary Surface roughness of Sintered Yttria Stabilised Zirconia (YSZ) Using High Speed Moderate Depth Super-Abrasive Grinding 2021 Arvind Patidar, Anand Kumar Mandal, Arun Kumar Chaudhary, Vandana Jain, Surface roughness of Sintered Yttria Stabilised Zirconia (YSZ) Using High Speed Moderate Depth Super-Abrasive Grinding, Materials Today: Proceedings, Volume 44, Part 1, 2021, Pages 2705-2709, ISSN 2214-7853, doi.org/10.1016/j.matpr.2020.12.686
26 Dr Rajiv Suman Significant applications of virtual reality for COVID-19 pandemic 2020 Ravi Pratap Singh, Mohd Javaid, Ravinder Kataria, Mohit Tyagi, Abid Haleem, Rajiv Suman, “Significant applications of virtual reality for COVID-19 pandemic”, Diabetes & Metabolic Syndrome: Clinical Research & Reviews 14 (2020) 661 – 664. https://doi.org/10.1016/j.dsx.2020.05.011.
27 Dr Rajiv Suman Electricity Generation Through Water Supply Pipes in High Rise Buildings 2020 Rajiv Suman, M Javaid, D Nandan, S Bahl, A Haleem, "Electricity Generation Through Water Supply Pipes in High Rise Buildings", Journal of Industrial Integration and Management. DOI: 10.1142/S2424862220500098.
28 Dr Rajiv Suman Internet of things (IoT) applications to fight against COVID-19 pandemic 2020 Ravi Pratap Singh, Mohd Javaid, Abid Haleem, Rajiv Suman, “Internet of things (IoT) applications to fight against COVID-19 pandemic”, Diabetes & Metabolic Syndrome: Clinical Research & Reviews 14 (2020) 521 – 524. https://doi.org/10.1016/j.dsx.2020.04.041.
29 Dr Rajiv Suman Industry 5.0: Potential applications in COVID-19 2020 Mohd Javaid, Abid Haleem, Ravi Pratap Singh, Mir Irfan Ul Haq, Ankush Raina, Rajiv Suman, “Industry 5.0: Potential applications in COVID-19”, Journal of Industrial Integration and Management. https://doi.org/10.1142/S2424862220500220.
30 Dr Rajiv Suman Telemedicine technologies for confronting COVID-19 pandemic: A Review 2020 Shashi Bahl, Ravi Pratap Singh, Mohd Javaid, Ibrahim Haleem Khan, Raju Vaishya, Rajiv Suman, “Telemedicine technologies for confronting COVID-19 pandemic: A Review”, Journal of Industrial Integration and Management. https://doi.org/10.1142/S2424862220300057.
31 Dr Rajiv Suman Make-over in the sustainable working platform during COVID-19 pandemic 2020 S Ali, Y Choudhary, M Javaid, A Haleem, RP Singh, Rajiv Suman, S Rab, “Make-over in the sustainable working platform during COVID-19 pandemic”, Sustainable Operations and Computers Volume 1, 2020, Pages 8-12. https://doi.org/10.1016/j.susoc.2020.10.001.
32 Dr Rajiv Suman Experimental study of electroless plating on acrylonitrile butadiene styrene polymer for obtaining new eco-friendly chromium-free processes 2020 Rajiv Suman, Devaki Nandan, Abid Haleem, Shashi Bahl, Mohd Javaid, “Experimental study of electroless plating on acrylonitrile butadiene styrene polymer for obtaining new eco-friendly chromium-free processes”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.04.843.
33 Dr Rajiv Suman Industry 4.0 technologies and their applications in fighting COVID-19 pandemic 2020 Mohd Javaid, Abid Haleem, Raju Vaishya, Shashi Bahl, Rajiv Suman, Abhishek Vaish, “Industry 4.0 technologies and their applications in fighting COVID-19 pandemic”, Diabetes & Metabolic Syndrome: Clinical Research & Reviews 14 (2020) 419 – 422. DOI: 10.1016/j.dsx.2020.04.032.
34 Dr Rajiv Suman 3D printing applications in bone tissue engineering 2020 Abid Haleem, Mohd Javaid, Rizwan Hasan Khan, Rajiv Suman, “3D printing applications in bone tissue engineering”, Journal of Clinical Orthopaedics and Trauma, Volume 11, Supplement 1, Pages S118-S124, February 2020. DOI: https://doi.org/10.1016/j.jcot.2019.12.002.
35 Dr. R. S. Jadoun Impact of Green Technology on Environment and Manufacturing Firms 2020 Reena Sanwal, Saurav Semwal, R.S Jadoun (2020), “Impact of Green Technology on Environment and Manufacturing Firms”, International Journal of Mechanical Handling and Automation 2019, Vol. 5: Issue 2, pp 43-55.
36 Dr. R. S. Jadoun A Review on Reduction of Scrap in Foundry by Using of Quality Control Tools 2020 Saurav Semwal, Reena Sanwal, R.S. Jadoun, (2020) “A Review on Reduction of Scrap in Foundry by Using of Quality Control Tools”, International Journal of Manufacturing and Materials Processing, 2020, Vol. 6: Issue 1, pp 1-11.
37 Dr. R. S. Jadoun A Review on Inventory Control Techniques of Various Industries 2020 Saurav Semwal, Reena Sanwal, R.S. Jadoun (2020), “A Review on Inventory Control Techniques of Various Industries, International Journal of Production Engineering, 2020, Vol. 6: Issue 1, pp 1-19.
38 Dr. R. S. Jadoun Optimization of Non-Traditional Machining Processes: A Review 2020 Reena Sanwal, Saurav Semwal, R.S. Jadoun (2020), “Optimization of Non-Traditional Machining Processes: A Review”, International Journal of Industrial Engineering and Design 2020 ,Vol. 6: Issue 1, pp 32-47.
39 Dr. R. S. Jadoun Evaluating the Growing Importance of IT in Management of Supply Chain 2020 Swapnil Agrawal, R.S. Jadoun (2020), “Evaluating the Growing Importance of IT in Management of Supply Chain”, International Journal of Industrial Engineering and Design 2020, Vol. 6: Issue 2, pp 18-34.
40 Dr. R. S. Jadoun Review on Pull and Push Strategy Decision Taken by Organizations for Their Product and Services 2020 Swapnil Agrawal, R.S. Jadoun (2020), “Review on Pull and Push Strategy Decision Taken by Organizations for Their Product and Services”, International Journal of Industrial Engineering and Design 2020 , Vol. 6: Issue 2, pp 1-7.
41 Arvind Patidar Comparative analysis of resistance spot welded and weld bonded joint of al 6082-T651 2020 Mandal, A.K., Meena, M.L., Chaudhary, A.K., Patidar, A. and Gupta, B.L., 2020. Comparative analysis of resistance spot welded and weld bonded joint of al 6082-T651. Materials Today: Proceedings.
42 Dr Maneesh Tewari Optimization of Friction Stir Welding Parameters using Combined Taguchi L9 and Genetic Algorithm 2020 Devaki Nandan, Maneesh Tewari. "Optimization of Friction Stir Welding Parameters using Combined Taguchi L9 and Genetic Algorithm" International Journal of Spatio-Temporal Data Science. accepted for publication in Nov 2020
43 Dr Maneesh Tewari Friction Stir Welding: A Green Approach for Joining. 2020 Saurav Semwal, Maneesh Tewari : “Friction Stir Welding: A Green Approach for Joining.” Internal Journal of Pollution and Noise Control. IJPNC.2020; Volume 6. Issue 2: 5-9p.
44 Dr Arun Kumar Chaudhary Effect of Feed Rate and Cutting Speed on Cutting Forces Developed During Machining of Epoxy Based Almond Shell (Prunus amygdalus L.) - Coconut Fiber (Cocos nucifera) Particle Reinforced Biocomposites 2020 Arun Kumar Chaudhary, PC Gope, Anand Kumar Mandal, Vandana Jain, Arvind Patidar, Effect of Feed Rate and Cutting Speed on Cutting Forces Developed During Machining of Epoxy Based Almond Shell (Prunus amygdalus L.) - Coconut Fiber (Cocos nucifera) Particle Reinforced Biocomposites, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.12.081
45 Devaki Nandan Sustainability of Coronavirus on different surfaces 2020 Suman, R., Javaid, M., Haleem, A., Vaishya, R., Bahl, S., & Nandan, D. (2020). Sustainability of Coronavirus on different surfaces. Journal of Clinical and Experimental Hepatology.
46 Devaki Nandan Electricity Generation Through Water Supply Pipes in High Rise Buildings 2020 Suman, R., Javaid, M., Nandan, D., Bahl, S., & Haleem, A. (2020). Electricity Generation Through Water Supply Pipes in High Rise Buildings. Journal of Industrial Integration and Management, 1-20.
47 Devaki Nandan Experimental study of electroless plating on acrylonitrile butadiene styrene polymer for obtaining new eco-friendly chromium-free processes 2020 Experimental study of electroless plating on acrylonitrile butadiene styrene polymer for obtaining new eco-friendly chromium-free processes R Suman, D Nandan, A Haleem, S Bahl, M Javaid Materials Today: Proceedings
48 Devaki Nandan Comparative study of silicon dioxide and kaolinite ratio for temperature and humidity variations of earth energy enabled cooling system and traditional cooler 2020 Suman, R., Nandan, D., Haleem, A., Bahl, S., & Javaid, M. (2020). Comparative study of silicon dioxide and kaolinite ratio for temperature and humidity variations of earth energy enabled cooling system and traditional cooler. Materials Today: Proceedings.
49 Devaki Nandan Optimization of dross formation rate in plasma arc cutting process by response surface method 2020 Sharma, D. N., & Kumar, J. R. (2020). Optimization of dross formation rate in plasma arc cutting process by response surface method. Materials Today: Proceedings.
50 Arun Kumar Chaudhary A System For Forecasting Solar Irradiance For A Solar-Based Photovoltaic System And Method Thereof 2020 Arun Kumar Chaudhary, Alaknanda Ashok, Indrajeet Kumar, “A System For Forecasting Solar Irradiance For A Solar-Based Photovoltaic System And Method Thereof”, IN Patent App. 202,011,044,299
51 Arun Kumar Chaudhary Thermal analysis of chicken fiber augmented epoxy composites 2020 Neha Sah, Alka Goel, Arun Kumar Chaudhary, Alka Verma, Thermal analysis of chicken fiber augmented epoxy composites, Materials Today: Proceedings, 2020, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.10.580
52 Dr Ajay An Investigation of Cutting Parameters and its Effects on Surface Roughness in High Speed Turning of 52100 Bearing Steel 2020 Rahul Kshetri, Ajay et.al;” An Investigation of Cutting Parameters and its Effects on Surface Roughness in High Speed Turning of 52100 Bearing Steel” Advances in Material Engineering and Manufacturing Processes, Springer Link, pp 105-115; May 2020.
53 Arun Kumar Chaudhary Comparative analysis of resistance spot welded and weld bonded joint of al 6082-T651 2020 Anand Kumar Mandal, M.L. Meena, Arun Kumar Chaudhary, Arvind Patidar, B.L. Gupta, Comparative analysis of resistance spot welded and weld bonded joint of al 6082-T651, Materials Today: Proceedings, 2020, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.10.446
54 Anand Kumar Mandal Comparative analysis of resistance spot welded and weld bonded joint of al 6082-T651 2020 Mandal, A.K., Meena, M.L., Chaudhary, A.K., Patidar, A. and Gupta, B.L., 2020. Comparative analysis of resistance spot welded and weld bonded joint of al 6082-T651. Materials Today: Proceedings.
55 Dr Rajiv Suman A review of the role of smart wireless medical sensor network in COVID-19 2020 Shokat Ali, Ravi Pratap Singh, Mohd Javaid, Abid Haleem, Honey Pasricha, Rajiv Suman, Jimmy Karloopia, "A review of the role of smart wireless medical sensor network in COVID-19", Journal of Industrial Integration and Management, Vol. 05, No. 04, pp. 413-425 (2020), https://doi.org/10.1142/S2424862220300069.
56 Dr Rajiv Suman Sustainability of Coronavirus on Different Surfaces 2020 Rajiv Suman, Mohd Javaid, Abid Haleem, Raju Vaishya, Shashi Bahl, Devaki Nandan, “Sustainability of Coronavirus on Different Surfaces”, Journal of Clinical and Experimental Hepatology. https://doi.org/10.1016/j.jceh.2020.04.020.
57 Dr Rajiv Suman Comparative study of silicon dioxide and kaolinite ratio for temperature and humidity variations of earth energy enabled cooling system and traditional cooler 2020 Rajiv Suman, Devaki Nandan, Abid Haleem, Shashi Bahl, Mohd Javaid, “Comparative study of silicon dioxide and kaolinite ratio for temperature and humidity variations of earth energy enabled cooling system and traditional cooler”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.04.847.
58 Dr Maneesh Tewari Effect of Process Parameters On The Electrical Conductivity of Friction Stir Welded Butt Joints of Thick AA1350 Aluminium Plates Using Taguchi Experimental Design 2019 Maneesh Tewari, R.S.Jadoun: “Effect of Process Parameters On The Electrical Conductivity of Friction Stir Welded Butt Joints of Thick AA1350 Aluminium Plates Using Taguchi Experimental Design .” in ‘Pantnagar Journal of Research’ volume 17(1) January-March 2019(ISSN:0972-8813) published by G.B.Pant University of Agriculture & Technology.
59 Dr. R. S. Jadoun Effect of Process Parameters On The Electrical Conductivity of Friction Stir Welded Butt Joints of Thick AA1350 Aluminium Plates Using Taguchi Experimental Design 2019 Maneesh Tewari and R.S.Jadoun (2019) “Effect of Process Parameters On The Electrical Conductivity of Friction Stir Welded Butt Joints of Thick AA1350 Aluminium Plates Using Taguchi Experimental Design”, in ‘Pantnagar Journal of Research’, ISSN:0972-8813, volume 17(1), pp. 74-79.
60 Dr Ajay Tool Wear Analysis During Turning of Hard Material by Simulink 2019 Rahul Kshetri, Ajay et.al; “Tool Wear Analysis During Turning of Hard Material by Simulink” International Journal of Engineering and Advanced Technology (IJEAT) Vol. 8 Issue 553, July 2019; ISSN: 2249-8958
61 Dr Rajiv Suman 3D PRINTING APPLICATIONS FOR VETERINARY FIELD 2019 A. Haleem, M. Javaid, R. Suman, “3D PRINTING APPLICATIONS FOR VETERINARY FIELD”, Indian Journal of Animal Health, Volume 58(2), Pages 171-173, December, 2019. DOI: 10.36062/ijah.58.2.2019.171-173.
62 Devaki Nandan Evapotranspiration Estimation Using SSEBop Method with Sentinel-2 and LANDSAT-8 Data Set 2018 Sharma, D. N., & Tare, V. (2018). Evapotranspiration Estimation Using SSEBop Method with Sentinel-2 and LANDSAT-8 Data Set. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 42, 5.
63 Dr Ajay Effects of Different Parameters on Tool Tip Temperature and Force Components During Turning 2018 Rahul Kshetri, and Ajay; “Effects of Different Parameters on Tool Tip Temperature and Force Components During Turning” International Journal of Scientific & Engineering Research (IJSER), Vol. 9 Issue 12, Dec. 2018.
64 Dr Ajay Sheet Metal Thickness Measurement Using Capacitive Transducer in Lab View 2016 Rahul Kshetri, Ravi Saxena, Ajay; Sheet Metal Thickness Measurement Using Capacitive Transducer in Lab View; International Conference on Emerging Developments in Engineering & Technology (ICEDET-2016) Nov. 2016
65 Dr Ajay Modification and Analysis of APIOBPCS Model using Inventory Control Best Practices for FMCG Sector 2015 Roopa Singh, Anurag Singh, and Ajay Agarwal; (2015); Modification and Analysis of APIOBPCS Model using Inventory Control Best Practices for FMCG Sector; International Journal of Basic and Applied Sciences Vol. 4. No. 3 2015. Pp. 108-117
66 Dr Rajiv Suman Microstructure and Mechanical Property Changes during TIG Welding of 31000-H2 (IS-737) Aluminium Alloy 2015 Rajiv Suman, P.C. Gope, “Microstructure and Mechanical Property Changes during TIG Welding of 31000-H2 (IS-737) Aluminium Alloy”, International Journal for Research in Applied Science & Engineering Technology (IJRASET), Volume 3, Issue VI, June 2015. ISSN: 2321-9653.
67 Dr Maneesh Tewari Design and Fabrication of Multi Utility Cart For Hill Areas 2014 Maneesh Tewari, Dr. R.S.Jadoun, Dr. Ajay, Sushil Kumar Choudhary. Design and Fabrication of Multi Utility Cart For Hill Areas. International Journal of Emerging Technology & Research( IJETR). Vol I, Issue 4, May-June 2014, ISSN(E): 2347-5900 ISSN(P):2347-6079.
68 Arun Kumar Chaudhary Water absorption and thickness swelling behaviour of almond (Prunus amygdalus L.) shell particles and coconut (Cocos nucifera) fiber hybrid epoxy based biocomposite 2014 Arun Kumar Chaudhary, P.C. Gope, V.K. Singh, Water absorption and thickness swelling behaviour of almond (Prunus amygdalus L.) shell particles and coconut (Cocos nucifera) fiber hybrid epoxy based biocomposite, Science and Engineering of Composite Materials. Volume 22, Issue 4, Pages 375-382, ISSN (Online) 2191-0359, ISSN (Print) 0792-1233, DOI: 10.1515/secm-2013-0317
69 VANDANA JAIN Effect of Slurry Temperature on Kerf Taper Angle in Abrasive Water Jet Machining 2014 https://d1wqtxts1xzle7.cloudfront.net/57139195/2.pdf?1533552248=&response-content-disposition=inline%3B+filename%3DEffect_of_slurry_temperature_on_kerf_tap.pdf&Expires=1604577534&Signature=A6P7el8JDugAbNhVa-Ejyz1V6Myd9P6ltu5ZFnZxEhZtzrdnyO1RQj37qdmjGS0mNAAfK9io93bBRS7jyBkMYDMP9QzNavrRI23ZDVcntG~Ttawc8nknIOCTzl6hiIKKvPaVo~H~D09-uUCgVKqoGekPPBGK12ZGGJT2whVnpOY7MmneRUnKMyBpUYGkrUiCoX1s54Frk1poVIJbTkaUA9ddRZGl-pmP88FmO6YyBRV1r6IX0GOu9twupZm672bWEObIh-ng4~AkLWTqvo7m2Hp7uIRj8fHMwPvnITXfiKzLGVXLe98ezZUpm4~M4IubIqug~ppMIa-6Z~QUaEHTbw__&Key-Pair-Id=APKAJLOHF5GGSLRBV4ZA
70 Dr Rajiv Suman Assessment of Deposition Rate in MIG Welding of Stainless Steel 2014 Suman, R., Kumar, J., “Assessment of Deposition Rate in MIG Welding of Stainless Steel,” International Journal of Research in Advent Technology, Vol.2, No.3, March 2014”. E-ISSN: 2321-9637.
71 Dr Rajiv Suman Computer Govern Maintenance System for a Process Industry 2014 Suman, R., Kumar, S., Chaudhary, Preet, P., “Computer Govern Maintenance System for a Process Industry,” Computer Engineering and Intelligent Systems, Vol.5, No.3, 2014, ISSN 2222-1719 (Paper) ISSN 2222-2863 (Online).
72 Dr Rajiv Suman Designing the Process of Stores Management for Implementing ERP in Manufacturing Organization: Case Study 2014 S. Chaudhary, Suman, R., “Designing the Process of Stores Management for Implementing ERP in Manufacturing Organization: Case Study,” Industrial Engineering Letters, Vol.4, No.3, 2014, ISSN 2224-6096 (Paper) ISSN 2225-0581 (online).
73 Dr Rajiv Suman Electronic Head Lamp Glare Management System for Automobile Applications 2014 Sushil Kumar Choudhary, Rajiv Suman, Sonali, Honey Banga, “Electronic Head Lamp Glare Management System for Automobile Applications”, International Journal of Research in Advent Technology, Vol.2, No.5, May 2014, E-ISSN: 2321-9637.
74 Dr Ajay Thermal Analysis of Epoxy Based Coconut Fiber-Almond Shell Particle Reinforced 2014 Arun Kumar Chaudhary, P. C. Gope, V. K. Singh, Alka Verma, Ajay, Rajiv Suman, “Thermal Analysis of Epoxy Based Coconut Fiber-Almond Shell Particle Reinforced” Advances in Manufacture Science and Technology, Vol. 38, No. 2, 2014, DOI: 10.2478/amst-2014-0009.
75 Dr. Arun Kumar Chaudhary Enhancement of wettability of aluminum based silicon carbide reinforced particulate metal matrix composite 2014 V. K. Singh, Sakshi Chauhan, P. C. Gope & A. K. Chaudhary, “Enhancement of wettability of aluminum based silicon carbide reinforced particulate metal matrix composite” High Temperature Materials and Processes. 34 (2), 163-170, ISSN (Online) 2191-0324, ISSN (Print) 0334-6455, DOI: 10.1515/htmp-2014-0043, June 2014. (I.F. 0.826)
76 VANDANA JAIN ANALYSIS OF LEAF SPRING CONDITIONS FOR HEAVY DUTY VEHICLE 2013 http://www.tjprc.org/publishpapers/2-23-1501582527-12.IJAuERDMAR201312.pdf
77 Arun Kumar Chaudhary Effect of Almond Shell Particles on Tensile Property of Particleboard 2013 Arun K. Chaudhary, P. C. Gope and V. K. Singh," Effect of Almond Shell Particles on Tensile Property of Particleboard", Journal Materials & Environment science 4 (1) (2013) 109-112.
78 Dr. Arun Kumar Chaudhary Evaluation of stress intensity factor of multipleinclined cracks under biaxial loading 2012 R. K. Bhagat, V. K. Singh, P. C. Gope, A.K. Chaudhary, “Evaluation of stress intensity factor of multipleinclined cracks under biaxial loading”, Frattura ed Integrità Strutturale, 22 (2012) 5-11; DOI: 10.3221/IGF-ESIS.22.01. ISSN 1971-8993
79 Dr. Arun Kumar Chaudhary Fabrication of Light Weight Farms Yoke With The Use of Composite Material 2012 V. K. Singh, Jayant Singh and Arun K. Chaudhary, “Fabrication of Light Weight Farms Yoke With The Use of Composite Material”, Agric Eng Int: CIGR Journal, 14(4) (2012) 80-85. ISSN 1682-1130
80 Dr Maneesh Tewari Utilization of Waste Agriculture Product to Enhance the Economy of Farmers 2012 Arun K. Chaudhary, V.K.Singh, Maneesh Tewari. Utilization of Waste Agriculture Product to Enhance the Economy of Farmers. Indian Research Journal of Extension Education. Special Issue (Vol I). January 2012, 89-92
81 Dr Maneesh Tewari Evaluation and Testing of Mechanical Properties of Bagasse-Glass-Fiber Reinforced Composite 2012 Maneesh Tewari, V.K.Singh, P.C.Gope, Arun Kumar Chaudhary. Evaluation and Testing of Mechanical Properties of Bagasse-Glass-Fiber Reinforced Composite. Journal of Material Science and Environment Science(ISSN:2028-2508)3(1)(2012)
82 Arun Kumar Chaudhary Evaluation and Testing of Mechanical Properties of Bagasse-Glass Fiber Reinforced Composite 2012 Maneesh Tewari, V. K. Singh, P. C. Gope and Arun K. Chaudhary, Evaluation and Testing of Mechanical Properties of Bagasse-Glass Fiber Reinforced Composite, Journal Materials & Environment science (ISSN: 2028-2508) 3 (1) (2012) 171-184.
83 Dr Arun Kumar Chaudhary Study of Propagation of a Pre-Existing Crack under Different Boundary Conditions for Fatigue Loading 2011 Tewari M., Singh V.K., Chaudhary A.K., Proulx T. (eds) Experimental and Applied Mechanics, Volume 6. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York
84 Arun Kumar Chaudhary Studies on Fracture Performance of Bio-fiber-Silica-glass Fiber Reinforced Epoxy Hybrid Composites 2011 Chaudhary A.K., Gope P.C., Singh V.K. (2011) Studies on Fracture Performance of Bio-fiber-Silica-glass Fiber Reinforced Epoxy Hybrid Composites. In: Proulx T. (eds) Experimental and Applied Mechanics, Volume 6. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York, NY, Springer, New York, NY


Disclaimer: The facts published on this website are for immediate information only and no legal claim can be made for any damage caused by using the content of this site. The College of Technology reserves the right to change the information published on this site at any point of time without prior or further notification. The correct details regarding Posts/Vacancies/Designation/Publications etc. pertaining to the user’s queries are to be provided by C.P.O. office/Concerned Unit Office after its verification.